Loading... Please wait...

Call us at: 216.965.4800

  • PZ2948, Installed (Red)
  • PZ2948/49, Black
  • PZ2948/49, Orange
  • PZ2950/51/52/53, Black
  • PZ2950/51/52/53, Orange
  • PZ2950/51/52/53, White
  • PZ1772, Black

Receiver Hitch, Rear - Thunderhawk PZ2948/PZ2950

MSRP
$143.50
Your Price:
$112.99 (You save $30.51)


Product Description

REAR 2" RECEIVER HITCH

Strongest hitch you can buy for the RZR XP1000 or XP Turbo
Mounts directly to frame at multiple points
Have aftermarket radius rods? This is the best hitch for you!
Strengthens radius rod mounts & frame

  • Strongest RZR XP 1000 / XP Turbo hitch available (patent-pending)
  • Hitch plate mounts directly to the frame, not just the four radius rod bolts
  • Stops frame damage caused by aftermarket high-clearance radius rods
  • Rear receiver hitch with twin tow hook points
  • Reinforced 2" receiver tube and gussets eliminate flex and bending of hitch
  • Upgrades frame to true double-shear radius rod mounting, increasing strength by 100%
  • Eliminates "egging-out" & cracking of radius rod mounting holes in the RZR frame
  • Makes transmission & differential fluid service and radius rod removal easy
  • Fits with stock, and most aftermarket radius rods
  • Durable black powdercoat finish
  • Optional colors available
  • Complete kit installs easily in about 45-60 minutes
  • 125 lb tongue weight rating
  • Fits Polaris RZR XP 1000, XP-4 1000 & XP Turbo
  • Special installation kit available to fit High-Lifter Edition, Desert Edition or Gold Matte LE (Rock Crawler) Edition models
  • Does NOT fit with Polaris rear bumper
  • Made in USA

Thunderhawk's patent-pending double-shear radius rod support plate design is the key to building the strongest RZR XP 1000 / XP Turbo rear receiver hitch. The Thunderhawk rear receiver hitch replaces the original radius rod stiffener plate and features additional frame mounting points (at both the top and bottom) to securely mount the hitch directly to the frame without relying only on the four radius rod bolts for mounting. By mounting the hitch to the frame in this fashion, towing loads are transferred directly to the frame to provide superior strength and eliminate damage to the radius rod bolts.

Thunderhawk's patent-pending double-shear mounting plate upgrades the stock RZR's suspension from a single-shear radius rod mount to a much stronger double-shear design. Thunderhawk's double-shear mount creates a second frame mount for the radius rods that is securely attached directly to the frame to support the rear of the radius rods. With the radius rods now supported on both the front (through the stock frame) and the rear (through the Thunderhawk double-shear plate), we have doubled the strength of the radius rod mounts, eliminating damaging frame flex and stopping the problem of deforming, elongating (egging-out) & cracking around the radius rod mounting holes in the thin RZR XP1000 / XP Turbo frame. Thunderhawk's double-shear design provides a major benefit by increasing frame and suspension strength even when you unhook the trailer and hit the trails.

If you have aftermarket raised radius rods, consider this.... There are two designs available now. The first style uses spherical bearings on both ends like the stock Polaris parts, these are the ones that rotate and flop around. The second style uses a bushing on one end to limit rotation, which causes bind in the suspension and applies a twisting load to the RZR frame where the radius rods are attached. The bushings used here also wear and allow a slight amount of flex in the length of the radius rod which creates an impact load that is transferred from the wheel to the frame while riding, and especially in corners. These high clearance radius rods are the primary cause of the frame damage that commonly occurs on the RZR XP900 and the XP1000. The Thunderhawk double-shear radius rod mounting design significantly strengthens the frame, and should be considered a necessity for anyone running aftermarket high-clearance radius rods.

The Thunderhawk rear receiver hitch is constructed using an automotive-grade, reinforced 2" receiver tube for strength, durability and proper fitment with your towing accessories. We've also added double gussets to eliminate deflection of the receiver tube when towing, and twin tow hook points for easy attachment of tow hooks or winch cables when necessary. The factory tow point is still accessible too. This Thunderhawk rear receiver hitch does NOT fit with the Polaris rear bumper, but we do offer other hitches for use with the Polaris bumper. The tongue weight rating for this hitch is 125 lbs.

The Thunderhawk rear receiver hitch features a differential fluid service access hole so that you can easily check and top-off differential fluid without having to remove the hitch. Thunderhawk's exclusive double-shear mounting plate design makes this the only hitch available for the RZR XP1000 and XP Turbo that does not apply additional strain to the four radius rod bolts by adding the towing load to these bolts, but instead mounts to the vehicle frame to apply towing loads directly to the frame. This design also stregthens the radius rods and the rear frame at the same time. Rear suspension work is also made much easier as the radius rods can now be removed and re-installed easily for service or maintenance. This Thunderhawk rear receiver hitch installs in about 45-60 minutes. Made in USA.

Durable black powdercoat finish is standard, with optional powdercoat colors available to match Polaris' suspension colors (add $10.00 for optional colors). Optional powdercoat colors are special-run colors that Thunderhawk Performance produces and inventories based on demand. If a color choice is listed but cannot be added to the cart to purchase, then that color is not available and we recommend black to match the RZR's frame. A special installation kit is available (adds $5.00) to fit this hitch on the High-Lifter Edition, Desert Edition or Gold Matte LE (Rock Crawler) Edition models, or for any RZR equipped with the Polaris #2879523 high-clearance radius rod kit.

Thunderhawk Performance receiver hitches accept standard 2" automotive receiver hitch components. 2" receiver hitches are commonly used on most pick-up trucks. Many people already own these hitch bars and components, but these parts are also readily available at any large discount store or auto parts chain.

Warranty Information

Varies by Year & Model

Add to Wish List

Click the button below to add the Receiver Hitch, Rear - Thunderhawk PZ2948/PZ2950 to your wish list.

You Recently Viewed...


Join Our Mailing List

Sign up to recieve special offers and latest deals.